Geometer

The GNSS RTK receiver GEORA IMU Tab KIT includes not only the compact GEORA GNSS RTK receiver with IMU and SurPad 4.2 software for Android but also a modern surveying tablet with all the necessary accessories for professional work.

The agricultural guidance system (tractor GPS/GNSS) Geotrack Lite with the new GNSS X2 receiver. An affordable agricultural navigation system with enhanced accuracy and quality components.

The GNSS receiver X2 is a high-tech satellite signal receiver equipped with a Bluetooth/BLE module for wireless communication. This receiver specializes in enhancing the sensitivity and quality of GNSS signals, significantly improving positioning accuracy in agricultural navigation systems such as parallel driving systems.

The VMM-50 Soil Moisture Meter is designed for diagnosing the relative humidity of various materials such as chernozem, clay, loam, sand, as well as peat, compost, straw, cereals, cement, concrete, and more

Surveying kit featuring the GNSS RTK receiver GEORA with a professional controller P94. The kit is delivered in a shockproof case or a portable bag.

The GEORA GNSS RTK receiver is a very compact and lightweight geodetic GNSS device. It has a sealed and impact-resistant body and can withstand a drop from a height of 1.6 meters

Single-frequency GNSS kit with decimeter accuracy on a free satellite signal, and with the ability to obtain RTK L1 accuracy. A new series of GPS/GNSS receivers in a compact GM PRO mini body. The kit consists of a protected smartphone with the "geometer SCOUT" software installed and a GM PRO model S GNSS receiver that communicates with the smartphone using a Bluetooth.

The single-frequency GNSS receiver "GM PRO S" of improved accuracy on a free satellite signal. A new series of receivers in a compact GM PRO mini body. The receiver has 335 channels for communication with satellites. Works with all satellite systems: GPS, GLONASS, GALILEO, BEIDOU, QZSS and can work in any country in the world. It can be used in geodesy, agriculture, forestry and other industries where high accuracy is important.

Multi-frequency GNSS GM PRO L KIT. The receiver has 965 channels, receives a signal from satellite systems GPS, GLONASS, GALILEO, BEIDOU, QZSS, IRNSS. Receiver works with L1, L2, L5 bands. The receiver is designed for performing of surveying works, such as: stakeout, determination of the exact boundaries of sites, land surveying, field area measurement, stake out points, stake out lines, GIS survey, stakeout roads, cross-section measurement, slope staking, power line survey, height control and other functions. The kit comes in a sealed shockproof box. 

The magnetic holder is designed to attach the GNSS receiver to the equipment without any inconvenience. The holder is compatible with receivers that have a 5/8" thread.

The "GM PRO U" GNSS RTK receiver is a dual-frequency (L1, L2) 184-channel RTK receiver that works simultaneously with several satellite systems and receives corrections in RTCM 3.X.X format. This receiver is compatible with any software. A new series of GM PRO mini receivers in a compact case.

GNSS RTK receiver GM PRO M is a multi-frequency (L1, L2, L5) 1408-channel receiver with an antenna that operates simultaneously with GPS, GLONASS, GALILEO, BeiDou, QZSS, IRNSS satellite systems and accepts corrections in the RTCM 3.X.X format. This receiver is designed to work with any software. Designed for professional use in surveying, agriculture, forestry and other industries where high accuracy is important.

GNSS RTK receiver GM PRO L is a multi-frequency (L1, L2, L5) 965-channel receiver with an antenna that operates simultaneously with GPS, GLONASS, GALILEO, BeiDou, QZSS, IRNSS satellite systems and accepts corrections in the RTCM 3.X.X format. This receiver is designed to work with any software. Designed for professional use in surveying, agriculture, forestry and other industries where high accuracy is important.

Special kit for positioning with centimeter RTK accuracy and obtaining high-precision coordinates. The set consists of a dual-frequency GNSS receiver GM PRO model U, rugged smartphone with geodetic software installed.

A telescopic aluminum survey pole TS180 is designed for comfortable surveying. The four-section construction delivers reliable stability with the help of solid flip locks.

GM04CRA Choke Ring GNSS Antenna has an impressive design, offering excellent multipath suppression and consistent millimeter accuracy. Its phase center is consistently stable, and covers all frequencies! Combining high gain, multi-system compatibility, and extreme reliability, this four-star full-frequency reference station antenna is sure to meet all your needs.

Multi-frequency (L1, L2, L5) helix antenna H20 is a high performance GNSS antenna designed for high-precision positioning services, with a stable phase center that maintains high gain at lower elevation positions, providing excellent satellite signal tracking. The antenna has a compact size, lightweight, and low power consumption, which can effectively reduce the load on the drone (UAV) and extend the battery life of the device.

Professional GNSS RTK base station based on a multi-frequency board, has 965 channels and processes signals from GPS, GLONASS, GALILEO, BEIDOU satellite systems.

Multi-frequency GNSS RTK base station L1, L2, L5.

Agricultural mobile application geometer SCOUT for Android smartphone or tablet. A low-cost solution that will allow you to carry out area measurement of any shape, measure distances, create electronic maps, staking-out, land surveying, cutting out unproductive areas (holes) and many other operations.

Multi-frequency GNSS RTK receiver "GM PRO L" with surveying software SurPad 4.2 for staking-out points, staking-out properties, cadastral measurements and much more.

Dual-frequency (L1, L2) helical antenna H1 is a high performance GNSS antenna designed for high-precision positioning services, with a stable phase center that maintains high gain at lower elevation positions, providing excellent satellite signal tracking. The antenna is small in size, light in weight and low in power consumption, which can effectively reduce the load of the device and improve the battery life of the device.

Bundle: GM PRO S single-frequency GNSS receiver and geometer SCOUT software for field area measurement (Smoothing mode + RTK L1) is the optimal kit for accurate measurements (measurement of area, distances, work with points). The GM PRO S external GNSS receiver is used to improve the sensitivity and quality of the GPS/GNSS signal.

The Dual-frequency GNSS "GM PRO U" with SurPad 4.2 for Android works in frequency ranges L1, L2 has 184 channels for performing of surveying works, such as: stakeout, determining clear boundaries of areas, land surveying, field area measurement, stake out points, stake out lines, GIS survey, stakeout roads, cross-section measurement, slope staking, power line survey, height control and other functions.

The kit of equipment: geometer mobile application (Android OS), for precise land area measurement with rugged smartphone and GM Spike receiver (SBAS). The geometer SCOUT GM Spike kit opens up completely new opportunities for agronomists in measuring the area of agricultural fields. Extremely protected device with new unique functions will allow every agronomist, manager or accountant to perform their work more efficiently and effectively.

Bundle: Dual-frequency GNSS receiver GM PRO U and geometer SCOUT application for stakin-out and precise measurements. This is the optimal set for accurate measurements (measurement of area, distances, accurate points). The GM PRO U receiver is used to obtain centimeter positioning accuracy.

The kit of equipment: geometer mobile application (Android OS) for precise land area measurement with a GM Spike receiver (SBAS). This is the optimal kit for measuring the area, distances and marking waypoints. An external receiver with an antenna is used to improve the sensitivity and quality of the GPS/GNSS signal. You will be able to carry out the necessary work with the area, namely: to measure the area of ​​fields of any shape, measure distances, create electronic maps, cutting unproductive areas and many other operations. 

Geometer Power Station is a lithium-ion battery in an aluminum body with a capacity of 3400 mAh. This is a useful accessory for GNSS receivers and GeoMeter devices, which will allow you to get extra charge in the field. 

Dual-frequency GM SMART GNSS RTK receiver is a new generation receiver for working with any navigation programs and the ability to increase accuracy up to 1 cm. It has 698 channels to work with all available satellite systems: GPS, GLONASS, GALILEO, BEIDOU, QZSS, IRNSS, SBAS.

The updated version of the GNSS receiver GM SMART now supports Precise Point Positioning (PPP) technology from the Galileo HAS satellite system. This next-generation receiver is compatible with any navigation software, providing high accuracy and reliable positioning. GM SMART supports RTK mode on L1/L2 frequencies, allowing for real-time corrections to achieve centimeter-level accuracy.

GM SMART GNSS receiver is a new generation receiver for working with any navigation programs and the ability to increase accuracy up to 1 cm. It has 335 channels to work with all available satellite systems: GPS, GLONASS, GALILEO, BEIDOU, QZSS, IRNSS, SBAS.

GM Spike GNSS receiver is an external receiver with a Bluetooth module, designed to improve the sensitivity and quality of the GPS signal and increase the accuracy of geolocation.

A ceramic cup with the image of a tractor and the Geometer company logo can be an original and pleasant gift.

Comfortable branded bag with strap for GM Spike GNSS receiver.

Multi-frequency GNSS RTK base station L1, L2, L5.