Single-frequency GNSS GM PRO S KIT
Single-frequency GNSS GM PRO S KIT
- Cash upon receipt
- Bank transfer
- Privat 24
- Pickup from NovaPoshta Service
- NovaPoshta Service Courier
- Pickup from the store
- Other transport services
Single-frequency GNSS kit with decimeter accuracy on a free satellite signal, and with the ability to obtain RTK L1 accuracy. A new series of GPS/GNSS receivers in a compact GM PRO mini body. The kit consists of a protected smartphone with the "geometer SCOUT" software installed and a GM PRO model S GNSS receiver that communicates with the smartphone using a Bluetooth. The kit comes in a sealed shockproof box.
This is the optimal kit for precise work with fields area (measurement of area, distances and stake-out). An external "GM PRO S" receiver is used to increase accuracy and improve the sensitivity and quality of the GPS/GNSS signal. You can independently and with high accuracy professionally measure the area of fields of any shape, measure distances, staking-out, land surveying, cut out unproductive areas, create electronic maps and many other operations with the area.
GM PRO mini Series
The receiver has 335 channels for communication with satellites and works with most satellite systems and frequencies:
- GPS: L1 C/A
- GLONASS: L1 C/A, L1P
- Galileo: E1
- BeiDou: B1
- QZSS: L1C
The GNSS receiver "GM PRO S" can work in coordinate smoothing mode on a free satellite signal. Coordinate smoothing mode is a satellite signal filtering technology and intelligent adaptation of the receiver's software when working with L1 signals, which allows you to obtain more accurate coordinates of relative accuracy. More about DP-Filter in the document.
The "GM PRO S" receiver has a very precisely calibrated geodetic antenna. The GNSS receiver "GM PRO S" can work with centimeter accuracy from any base station or correction network via the Internet (RTCM 2.X, 3.X, CMR, CMR+ protocols). The distance of the base station for the RTK L1 version can be between 5-8 km. Such availability of base stations exists in large cities. There is support for firmware unlocking up to the level of a dual-frequency RTK L1/L2 receiver (optional), which allows you to use this receiver from a basic level of accuracy to a professional one. The distance from the base station when working with a dual-frequency RTK can be 50 km or more. The receiver has built-in Bluetooth for connecting to any compatible applications.
- GNSS receiver GM PRO S L1
- Rugged smartphone, memory: 6/128 Gb
- Software geometer
- Power cable
- Telescopic Pole TS180
- Case for storage and transportation
- Pole mount for smartphone
- Measurement of small areas
- Stake-out of points
- Creating a field map
- Instant view on Google Maps
- Connecting additional devices via Bluetooth
- Working with soil density meter
- Dividing of fields
- Cutting plots inside (holes)
- Field markup
- Planning of center pivot irrigation systems
- Determination of area
- Determination of distances
- Synchronization with Agroprofile
Accuracy of area measurement:
Accuracy of positioning Smooth mode:
Accuracy of positioning RTK mode:
Support for programs and operating systems:
version 9 or higher
SUPPORT FOR NMEA PROTOCOL
The GNSS RTK receiver uses standard NMEA messages, ensuring high compatibility with all types of software that support geolocation functions. This provides accurate and reliable coordinate determination.
POSSIBILITY OF WORKING WITH A CADASTRE
A special layer "Cadastre" has been added to the geometer program, which will allow you to visually display your location relative to the boundaries of your land. It is possible to set extreme points with their preservation for further access to them.
SOLVING LAND-RELATED ISSUES
With the geometer SCOUT mobile application and GM PRO model S receiver, you can easily avoid any conflicting situations. Sometimes such questions arise when the equipment is hired for the amount of work performed. The tenant claims that his field area is 12 hectares, and you feel that this is not the case with fuel and other materials. Our GNSS kit will help you in such a situation. It is enough to go around the field exactly on its perimeter, and you will immediately see a picture of this field and its accurate area. With the help of the Agroprofile portal, you will be able to print a field map with full information about it. An RTK receiver kit may be required to obtain high-precision coordinates.
DATA SECURITY AND CONVENIENCE OF WORKING WITH COLLEAGUES
Agricultural mobile application geometer SCOUT installed on a device with Android OS is a personalized device. Log in to your Agroprofile account and sync fields. Share notes and other data with colleagues within the same company. Data exchange takes place via a secure protocol. No one but you will be able to access your data. Your Agroprofile account is password protected. You can put a password on your smartphone in one of the available options: PIN code, face recognition, graphic password.
WORK WITH (SOIL DENSITY METER) PENETROMETER
Geometer SCOUT can connect to additional devices via Bluetooth and receive data from them. When working with the Digital Penetrometer, the soil density parameters for the measured points are added to the waypoints. The result is displayed on the display of the device geometer Scout in the form of a graph, and is also saved for report generation. When synchronizing, measurement data is sent to the online profile of Agroprofile to save the complete history of field research, as well as to receive advanced reports.
DATA TRANSFER AND CLOUD TECHNOLOGIES
The supplemented capabilities of the Agroprofile online platform have been specially developed taking into account the technologies of the Geometer SCOUT device. Direct synchronization of data between employees of one company within the company profile. Store a database of your fields on all your devices and have secure access to them 24/7 using the Agroprofile system. You can use the measured object files in any program, thanks to the built-in file export capabilities. You can export data in the following formats: kml, utm, mgrs, txt, csv, user date.
DIVIDING THE FIELDS
Geometer SCOUT has an intuitive menu, and you can divide the field into several sections in one of several ways. Make the most of geometer SCOUT. Do I need to measure the field into several parts? To do this, just touch the desired place on the screen. And the field area will be divided according to the parameters you need. You decide how to divide the field.
ALL FUNCTIONS IN ONE CLICK
Brand new geometer SCOUT software is both simple and functional. The new logic of the program will allow you to perform many functions and calculations in just one click. Whether it's measuring the area, dividing the area into several parts, cutting unproductive areas - all this you get with maximum convenience. New features: field marking, selection of the most convenient field trajectory, embedding circles in semi-automatic mode for the construction of center pivot irrigation systems, work in RTK mode, view measurements on Google maps in real time.
Dimensions (mm):339 x 295 x 152 mm
Weight (kg):2.9 кг
Number of channels:335
Positioning horizontal accuracy:20-40 см
Sattelite systems:GPS, Galileo, Glonass, Beidou
Range of working temperatures:-40°C to + 80°C
Cold start:< 50 sec
Warm start:< 45 sec
Hot start:< 3 sec
Integrated memory:128 Gb
Power supply :Battery
Communication standard support:2G/3G/4G