Best deals for UK and EU customers with zero tariffs on all products from Ukraine.
Best deals for UK and EU customers with zero tariffs on all products from Ukraine.

Single-frequency GNSS GM PRO S with geometer SCOUT

Out of stock
In stock

Single-frequency GNSS GM PRO S with geometer SCOUT

Out of stock
In stock
( 139 )
37 530,00
31 275,00
-16.67 %
Payment methods
  • Cash upon receipt
  • Bank transfer
  • Privat 24
Shipping methods
  • Pickup from NovaPoshta Service
  • NovaPoshta Service Courier
  • Pickup from the store
  • Other transport services

Bundle: GM PRO S single-frequency GNSS receiver and geometer SCOUT software for field area measurement (Smoothing mode + RTK L1) is the optimal kit for accurate measurements (measurement of area, distances, work with points). The GM PRO S external GNSS receiver is used to improve the sensitivity and quality of the GPS/GNSS signal.

You will be able to independently and with high accuracy carry out professional measurement of the area with any shape, measure distances, *staking-out, *surveying, cutting out unproductive areas, creating electronic maps and many other operations with the area. 

* RTK mode is required for some types of work.

GM PRO mini Series

The new GM PRO series of second-generation GNSS receivers have improved internal architecture, optimized energy saving, high-quality system components, sealed, impact-resistant design and unique appearance. New GPS/GNSS receivers can work up to 15 hours on a single charge from built-in batteries. All GM PRO mini receivers are covered by a 12-month warranty.

The receiver has 335 channels for communication with satellites and works with most satellite systems and frequencies:

  • GPS: L1 C/A
  • GLONASS: L1 C/A, L1P
  • Galileo: E1
  • BeiDou: B1
  • QZSS: L1C

The GNSS receiver "GM PRO S" can work in coordinate smoothing mode on a free satellite signal. Coordinate smoothing mode is a satellite signal filtering technology and intelligent adaptation of the receiver's software when working with L1 signals, which allows you to obtain more accurate coordinates of relative accuracy. More about DP-Filter in the document.

The "GM PRO S" receiver has a very precisely calibrated geodetic antenna. The GNSS receiver "GM PRO S" can work with centimeter accuracy from any base station or correction network via the Internet (RTCM 2.X, 3.X, CMR, CMR+ protocols). The distance of the base station for the RTK L1 version can be between 5-8 km. Such availability of base stations exists in large cities. There is support for firmware unlocking up to the level of a dual-frequency RTK L1/L2 receiver (optional), which allows you to use this receiver from a basic level of accuracy to a professional one. The distance from the base station when working with a dual-frequency RTK can be 50 km or more. The receiver has built-in Bluetooth for connecting to any compatible applications.

The receiver has a standard 5/8" thread, compatible with any geodetic poles, tripods and other accessories. The receiver is powered by 5V and can be recharged from any power bank.

As a monitor, you can use your tablet or smartphone with Android OS, on which geometer SCOUT licensed software will be installed. This software includes technical support directly from the developer. In addition, the program is regularly improved and updated in accordance with the needs of modern farmers. If necessary, you can update your program to the latest version yourself. The receiver is connected to your device using a wireless Bluetooth connection or USB. 

To install the software you will need a device with the following minimal technical parameters:

Operating system Android, version 9 and above
Google Mobile Services (GMS) necessarily (Google Maps, Play Market)
Display 5 inches or bigger
RAM 2 Gb and more
Bluetooth yes
Wi-Fi yes
SIM-Card optional, if you need RTK 


Kit of equipment:

  • Single-frequency GNSS receiver GM PRO S;
  • Software geometer SCOUT;
  • USB Type-C cable;
  • Cardboard packaging;
  • Carrying case (optional).

Single-frequency GNSS receiver "GM PRO S" is suitable for performing any operations:

  • *Surveying
  • Measurement of small areas
  • *Stake-out of points
  • Creating a field map
  • Instant view on Google Maps
  • Counting the number of rows when working with wide-cut equipment
  • Connecting additional devices via Bluetooth
  • Working with soil density meter
  • Dividing of fields
  • Cutting plots inside (holes)
  • Field markup
  • Planning of center pivot irrigation systems
  • Determination of area
  • Determination of distances
  • Synchronization with Agroprofile
Accuracy of area measurement:
Accuracy of positioning Smooth mode:
20-40 cm
Accuracy of positioning RTK mode:
1-2 cm


Support for programs and operating systems:
Operating system:


version 9 or higher



geometer SCOUT

Useful links


The GNSS RTK receiver uses standard NMEA messages, ensuring high compatibility with all types of software that support geolocation functions. This provides accurate and reliable coordinate determination.

A special layer "Cadastre" has been added to the geometer program, which will allow you to visually display your location relative to the boundaries of your land. It is possible to set extreme points with their preservation for further access to them.

With the geometer SCOUT mobile application and GM SPIKE GNSS receiver, you can easily avoid any conflicting situations. Sometimes such questions arise when the equipment is hired for the amount of work performed. The tenant claims that his field area is 12 hectares, and you feel that this is not the case with fuel and other materials. Our GNSS kit will help you in such a situation. It is enough to go around the field exactly on its perimeter, and you will immediately see a picture of this field and its accurate area. With the help of the Agroprofile portal, you will be able to print a field map with full information about it. An RTK receiver kit may be required to obtain high-precision coordinates.

Agricultural mobile application geometer SCOUT installed on a device with Android OS is a personalized device. Log in to your Agroprofile account and sync fields. Share notes and other data with colleagues within the same company. Data exchange takes place via a secure protocol. No one but you will be able to access your data. Your Agroprofile account is password protected. You can put a password on your smartphone in one of the available options: PIN code, face recognition, graphic password.

Geometer SCOUT can connect to additional devices via Bluetooth and receive data from them. When working with the Digital Penetrometer, the soil density parameters for the measured points are added to the waypoints. The result is displayed on the display of the device geometer Scout in the form of a graph, and is also saved for report generation. When synchronizing, measurement data is sent to the online profile of Agroprofile to save the complete history of field research, as well as to receive advanced reports.

The supplemented capabilities of the Agroprofile online platform have been specially developed taking into account the technologies of the Geometer SCOUT device. Direct synchronization of data between employees of one company within the company profile. Store a database of your fields on all your devices and have secure access to them 24/7 using the Agroprofile system. You can use the measured object files in any program, thanks to the built-in file export capabilities. You can export data in the following formats: kml, utm, mgrs, txt, csv, user date.

Geometer SCOUT is equipped with a modern screen with IPS technology and a resolution of HD 720x1440 pixels. The increased screen brightness of 400 nits will allow you to perform work with great comfort, even on a bright sunny day. Geometer SCOUT has scratch-resistant Gorilla Glass. Using geometer to measure the area of fields is easy, simple and convenient!

Geometer SCOUT has an intuitive menu, and you can divide the field into several sections in one of several ways. Make the most of geometer SCOUT. Do I need to measure the field into several parts? To do this, just touch the desired place on the screen. And the field area will be divided according to the parameters you need. You decide how to divide the field.

Brand new geometer SCOUT software is both simple and functional. The new logic of the program will allow you to perform many functions and calculations in just one click. Whether it's measuring the area, dividing the area into several parts, cutting unproductive areas - all this you get with maximum convenience. New features: field marking, selection of the most convenient field trajectory, embedding circles in semi-automatic mode for the construction of center pivot irrigation systems, work in RTK mode, view measurements on Google maps in real time.

Агропрофіль - система онлайн планування для сільського господарства


Product videos:
  • Dimensions (mm):
  • Weight (kg):
    0.59 kg
  • Manufacturer country:
  • Accuracy:
    10-20 cm
  • GNSS receiver type:
    GM PRO mini
  • Brand:
  • Number of channels:
  • Positioning horizontal accuracy:
    0.008 м + 1 ppm (RTK L1)
  • Positioning vertical accuracy:
    0.015 m + 1 ppm (RTK L1)
  • Sattelite systems:
    GPS, BeiDou, GLONASS, Galileo, QZSS, SBAS
  • Frequency:
    1-10 Hz
  • Range of working temperatures:
    -40°C to + 85°C
  • Bluetooth:
  • Cold start:
    < 60 sec
  • Warm start:
    < 15 sec
  • Hot start:
    < 10 sec
  • Power supply :
  • Ingress Protection:
No reviews yet
Write a review
Enter your comment*
( 8 )
2 919,00
2 502,00

A telescopic aluminum survey pole TS180 is designed for comfortable surveying. The four-section construction delivers reliable stability with the help of solid flip locks.

( 13 )
70 000,00

An RTK base station is a device that sends a correction signal (corrections) over the Internet, which allows you to increase the accuracy of conventional GPS/GNSS positioning (determination of coordinates) up to 2 cm.

Universal aluminum holder designed to mount a smartphone for use on a geodetic pole or tripod.